Fire Cert Academy
Back to blog
Florida Fire Protection Contractor II: Requirements and Scope

Florida Fire Protection Contractor II: Requirements and Scope

What the Florida Contractor II license covers, the four years of water-based experience you need to sit the exam, the fees, renewal hours, and how it differs from Contractor I.

November 16, 20265 min readFlorida Fire Protection System Contractor (I–V)
Contents

Florida Fire Protection Contractor II: Requirements and Scope

Contractor II is Florida's water-based fire protection contractor license. If your business is sprinklers, standpipes, fire pumps and the piping that feeds them, and you have no plans to install carbon dioxide or wet chemical systems, this is the class built for you.

This guide covers what Contractor II authorizes, what you need before you can sit the exam, what it costs, and how it compares with the other four classes.

What Contractor II authorizes

Florida defines the class in F.S. § 633.102. A Contractor II's business is limited to contracts that require the ability to lay out, fabricate, install, inspect, alter, repair and service:

Pre-engineered systems are excluded, as they are for every class.

The same section gives Contractor I and II holders limited design authority. Either may design a new sprinkler system of 49 or fewer sprinklers, design certain alterations of up to 249 sprinklers (with conditions on occupancy, hazard classification and water demand), and design any system within the scope of NFPA 13D, whatever the sprinkler count. Read § 633.102 itself before relying on those limits.

Like every class, Contractor II is a qualifier credential. An individual passes the exam and that individual qualifies the business.

Contractor II in the I–V family

Florida's State Fire Marshal licenses fire protection contractors in five classes, each with its own exam:

ClassScopeExam
Contractor IEvery fire protection system type except pre-engineered100 questions, 150 minutes
Contractor IIWater-based systems100 questions, 150 minutes
Contractor IIICarbon dioxide, foam, dry chemical, Halon and other chemical systems100 questions, 150 minutes
Contractor IVNFPA 13D sprinklers in detached one- and two-family dwellings and mobile homes50 questions, 60 minutes
Contractor VUnderground fire mains, from the point of service to 1 foot above the finished floor100 questions, 150 minutes

The practical difference between I and II is the chemical side. Contractor I adds carbon dioxide, clean agent, dry and wet chemical, and commercial cooking protection. If none of that is in your work, Contractor II tests less material and covers everything you do.

Fire alarm is not in any of the five classes. In Florida it is a DBPR credential, the Alarm System Contractor license under F.S. Chapter 489, Part II.

Eligibility

Under F.S. § 633.318(3)(b), to sit the Contractor II examination you must:

The statute also says the required education and experience must include training and experience in both installation and system layout. Four years spent only on installation crews may not satisfy the Bureau, so document your layout work as carefully as your field hours.

Once the Bureau approves you, your exam authorization is valid for six months. Book inside that window. If it lapses, you re-apply to the Department for a new one.

Fees

ItemFee
Application$300 per class of certificate
Biennial renewal$150 per class of certificate

The same caveat applies here as on Contractor I. The current Pearson VUE candidate handbook lists no charge at reservation for the Contractor I–V exams, while F.S. § 633.132 lists a $100 examination or reexamination fee for each class of certificate. Confirm the current figure with the Bureau when you apply.

Renewal and reciprocity

Certificates expire every two years, at midnight on June 30. Under F.S. § 633.332, a Contractor II certificate cannot be renewed without documentation of at least 32 contact hours of continuing education in the fire protection discipline during the biennial period.

F.S. § 633.318 contains no reciprocity provision. Experience earned in another state may count toward your four years, but nothing waives the Florida exam.

The exam you are working toward

The Contractor II exam is 100 questions in 150 minutes, 70% to pass, taken by computer at a Pearson VUE test center. It is open book, with sixteen permitted references.

About 28% of it is Florida statute and administrative rule rather than NFPA standards, and NFPA 24 on private fire service mains carries more weight than most candidates expect. The topic weights are in what's on the Contractor II exam, and the reference list with editions is in the Contractor II exam-day guide.

What to do next

Get your four years documented, layout experience included, and your application in. Then study against the published weights.

Our Florida Fire Protection System Contractor practice tests cover all five classes in one subscription, with a separate exam for each one weighted to its own Pearson VUE content outline. Every answer cites the NFPA standard or Florida rule section behind it.

Start with the free 10-question sample test to see how the mix of NFPA standards and Florida law feels.

Scope, eligibility, fee and renewal details come from F.S. §§ 633.102, 633.132, 633.318 and 633.332, and the Florida Fire Prevention candidate handbook. Confirm current requirements and fees with the Bureau of Fire Prevention before applying. This is exam-prep guidance, not legal advice.

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass Florida Fire Protection System Contractor (I–V)?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

Florida Contractor II Exam Day: 16 References and the Edition Trap

Florida Contractor II Exam Day: 16 References and the Edition Trap

Every reference you may bring into the Florida Contractor II exam, with the edition Florida pins to each, plus ID, calculator, retake and score-report rules.

Nov 16, 2026 · 5 min readFlorida Fire Protection System Contractor (I–V)
What's on the Florida Contractor II Exam? All 14 Topic Weights

What's on the Florida Contractor II Exam? All 14 Topic Weights

100 questions across 14 weighted topic areas. The full published weighting for Florida's water-based contractor exam, including the 12% on NFPA 24 and the 28% that is Florida law.

Nov 16, 2026 · 5 min readFlorida Fire Protection System Contractor (I–V)
Florida Fire Protection Contractor II: Requirements and Scope

Florida Fire Protection Contractor II: Requirements and Scope

What the Florida Contractor II license covers, the four years of water-based experience you need to sit the exam, the fees, renewal hours, and how it differs from Contractor I.

Nov 16, 2026 · 5 min readFlorida Fire Protection System Contractor (I–V)