
What's on the Washington Electrical Administrator Exam? All Three Sections and How to Study
The PSI outline for the Washington 01 electrical administrator exam: 65 NEC and Theory questions by article range, 17 Washington Codes questions, 10 major load calculations, 70% on each section, on the 2020 NEC.
Contents
What's on the Washington Electrical Administrator Exam?
The 01 administrator exam has three sections, each scored on its own, and you need 70% on each. Within your two-year exam period you retake only the section you fail.
| Section | Questions | Time |
|---|---|---|
| NEC and Theory | 65 | 4 hours |
| Washington Codes (RCW 19.28 and WAC 296-46B) | 17 | 1 hour |
| Major Load Calculations | 10 | 2 hours |
Up to 10 more questions may be unscored experimental items. Anyone can take this exam, but it is a full code exam: if you have not worked as an electrician, plan time to learn the NEC, not just the law.
NEC and Theory: the outline
PSI's bulletin (October 2025) lists the 65 questions by NEC article range and calls the counts approximate.
| NEC articles | Topic | Questions |
|---|---|---|
| 90 | Introduction | 2 |
| 100–110 | Definitions, general requirements | 3 |
| 200–225, 280–285 | Branch circuits, feeders, surge protection | 3 |
| 230 | Services | 5 |
| 240 | Overcurrent protection | 6 |
| 250 | Grounding and bonding | 6 |
| 300–398 | Wiring methods and materials | 10 |
| 400–427, 455–480 | Equipment for general use | 3 |
| 430–450 | Motors, A/C, generators, transformers | 4 |
| 490 | Equipment over 1000 V | 1 |
| 500–516 | Hazardous locations | 3 |
| 517–590 | Special occupancies | 4 |
| 600–695 | Special equipment | 3 |
| 700–702 | Emergency and standby systems | 2 |
| 705–780 | Special conditions | 1 |
| 800–830 | Communications systems | 1 |
| — | General trade knowledge and theory | 8 |
Wiring methods, overcurrent and grounding are 22 of the 65. Theory (8) is general math and electrical theory.
Major Load Calculations: 10 questions in 2 hours
Twelve minutes a question means multi-step problems: dwelling services by the standard and optional methods, multifamily buildings, commercial lighting and receptacle loads, and motor feeders. Work them from Article 220 of the 2020 NEC; 2023 study material numbers the key tables differently (Table 220.12 became 220.42(A), Table 220.42 became 220.45).
Washington Codes: 17 questions in an hour
The law section is RCW 19.28 and WAC 296-46B, and for an administrator it is the part of the job you will use every day: contractor licensing and bonds, the administrator's duties and the 90-day replacement rule, permits and inspections, exemptions, penalties and appeals, plus Washington's NEC amendments. Bring both printed and bound in a three-ring binder, and print current versions: the exam rules changed on November 20, 2026, and more amendments take effect on December 31, 2026.
A study plan built on the weights
- Learn to find things in the 2020 NEC. Tab Chapters 2 through 4 and Chapter 9 first.
- Load calculations. Practise full dwelling and commercial calculations until the steps are routine.
- Theory. Ohm's law, power and three-phase formulas.
- Read RCW 19.28 and WAC 296-46B in your binder.
- Sit all three sections timed.
The exam moves to the 2026 NEC in July 2027. Our free practice test gives you 10 questions on the 2020 NEC. The full exam prep has a timed full-length practice exam for each section, with every calculation worked out and every answer citing its section. For the day itself, see Washington electrical administrator exam day.
Ready to pass Washington Electrical Administrator (01)?
Start your prep with unlimited practice tests and codebook-referenced answers.
Start Studying →
