
Virginia Fire Suppression Contractor (FSP): Qualified Individual Requirements
How a Virginia contractor gets the Fire Suppression Contracting (FSP) specialty: the Qualified Individual, the 1/3/5-year experience rule, the PSI technical exam, fees, and how FSP differs from the Fire Sprinkler (SPR) specialty.
Contents
Virginia Fire Suppression Contractor (FSP): Qualified Individual Requirements
Virginia doesn't license suppression technicians one by one. It licenses the contracting firm. A firm that installs or services clean agent, CO2, dry chemical or kitchen hood systems carries the Fire Suppression Contracting (FSP) specialty on its contractor license, issued by the Department of Professional and Occupational Regulation (DPOR), Board for Contractors. Every specialty on a license needs a Qualified Individual, and for FSP that person has to pass a technical exam given by PSI.
What the FSP specialty covers
PSI's exam outline defines FSP as the installation, repair, improvement or removal of fire suppression systems, "including but not limited to halon and other gas systems; dry chemical systems; and carbon dioxide systems." Two more lines in that definition matter:
- No other classification provides this function. Unlike fire alarm work, which an Electrical (ELE) contractor can already do, suppression work needs the FSP specialty itself.
- FSP does not cover water sprinklers. The outline says the specialty "does not provide for the installation, repair, or maintenance of water sprinkler systems." That is a separate specialty (see below).
In practice, FSP is the license for special-hazard and kitchen work: clean agent and halon systems, carbon dioxide, dry chemical, wet chemical restaurant systems, foam, and the portable extinguishers that go with them.
The Qualified Individual
DPOR requires each licensed firm to name a Qualified Individual (QI) for each classification and specialty printed on its license. The QI must be a full-time employee or a member of the firm's responsible management. Experience depends on the license class the firm holds:
| Firm's license class | QI experience in the specialty |
|---|---|
| Class C | at least 1 year |
| Class B | at least 3 years |
| Class A | at least 5 years |
Since December 1, 2012, a new license, a specialty added to an existing license, or a change of QI also needs a qualifying credential. For FSP, that credential is the PSI technical exam, "Virginia Fire Suppression Contracting."
How the process works
- Apply to DPOR. The QI is approved through the firm's license application, an additional-specialty application, or a QI change form. DPOR makes the candidate eligible to test.
- Schedule with PSI. Register at PSI's Virginia contractor page and pick a test center or a remote-proctored session. Eligibility lasts one year.
- Pass the exam. 50 questions, 2 hours, open book, 70% to pass. You can retake it as often as you need during the eligibility year.
- Finish the license. Use the same identification number (SSN or DMV number) when you schedule the exam and when you apply for the license.
Fees
PSI charges $85 per attempt. The fee is non-refundable and good for one year. DPOR's license application fees are separate and depend on the class of license.
Renewal
Virginia contractor licenses renew every two years. The FSP Qualified Individual has no continuing education requirement. If your QI leaves, the firm has to name a new one, and the new QI must meet the experience rule and pass the exam.
FSP vs. the Virginia fire sprinkler license
People searching for a "Virginia fire sprinkler license" usually land on FSP by mistake. The Virginia fire specialties split like this:
- Fire Suppression (FSP): gaseous agent, CO2, dry chemical and kitchen systems. PSI exam required. No water sprinklers.
- Fire Sprinkler (SPR): water-based sprinkler systems. No exam. The QI needs NICET Level III or higher, or a Virginia PE license with sprinkler layout experience.
- Fire Alarm Systems (FAS): alarm systems at 50 volts or less. Its QI takes a separate PSI exam; see the FAS requirements.
- Certified Automatic Fire Sprinkler Inspector: an individual certification with no exam, based on NICET Inspection and Testing of Water-Based Systems Level II.
A firm that does both kitchen hood systems and sprinklers needs both FSP and SPR on its license.
Next steps
See what is on the FSP exam and what to expect on exam day. Our Virginia FSP practice exam follows PSI's outline, and the free sample test lets you try 10 questions first.
Sources: DPOR Board for Contractors exam information (A501-27EXINFO, 09/01/2025), PSI's Virginia Contractor Specialty candidate information bulletin (5/20/2024) and the PSI Fire Suppression Contracting content outline, read November 2026. Confirm requirements and fees with DPOR before you apply.
Ready to pass Virginia Fire Suppression Contractor (FSP)?
Start your prep with unlimited practice tests and codebook-referenced answers.
Start Studying →
