Fire Cert Academy
Back to blog
Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Who needs a Seattle Fire Department certificate of competency, the 22 SFD certificate types (FEX, E-4KH, FA-1, FA-ITM, AS-3 and more), the $515 closed-book exam, the state prerequisites and the three-year re-test.

November 18, 20265 min readSeattle Fire Department Certifications
Contents

Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

If you install, program, inspect, test or maintain fire protection systems inside the City of Seattle, you need a Seattle Fire Department (SFD) certificate of competency for that type of work. The rule is SFD Administrative Rule 9.01, issued under the Seattle Fire Code, and it applies to every individual unless one of the rule's exceptions covers them. Doing the work without a valid certificate is a criminal violation, and contractors who send uncertified technicians can be cited too.

The certificate is a card for a specific type of work, earned by passing a written SFD exam. A state certificate does not replace it, and it does not replace any state certificate.

Our Seattle Fire Department practice exams start with the FEX fire extinguisher exam. We will add more SFD exam types to the same subscription.

The certificate types

SFD's July 2026 study packet lists these types:

TypeWhat it covers
FEX-1All portable fire extinguisher work, including everything in FEX-2, FEX-3 and FEX-4
FEX-2Installing, inspecting, testing, maintaining, charging and recharging portable extinguishers
FEX-3Hydrostatic testing of extinguisher cylinders
FEX-4Annual external examination of CO2 or stored-pressure extinguishers with pressure indicators or gauges
E-4KHPre-engineered kitchen hood suppression systems
E-4SBPre-engineered dry chemical systems, including spray booths
E-4ComboEverything in E-4KH and E-4SB
E-1, E-2, E-3Foam and water mist; carbon dioxide; clean agent, halon replacement, aerosol and engineered wet and dry chemical systems
FA-1Installing, programming, inspecting, testing and maintaining fire alarm systems
FA-ITMInspecting, testing (except acceptance testing) and maintaining fire alarm systems
AS-3(S), AS-2(S)Sprinkler systems including standpipes, at state Level 3 (journey) or Level 2 (residential)
AS-ITT(S), STP-ITMInspection and testing of water-based systems; standpipe inspection, testing and maintenance
FP-1, FP-ITMFire pumps and controllers
EG-1, EG-ITMEmergency generators
SC-1, SC-ITMSmoke control systems

In December 2025 SFD split the old E-4 into E-4KH (kitchen hoods), E-4SB (spray booths) and E-4Combo, to line up with the Washington amendments to the fire code's section 904.1.1.

State requirements come first

When Washington law requires a state credential for the work, you must show it before SFD will issue its certificate:

SFD does not list a state prerequisite for the FEX types.

The exam

FormatWritten, at the Fire Prevention Division, 220 Third Avenue South
BooksClosed book
TimeOne hour per exam
Exams per dayUp to two
Fee$515 per exam, including one re-test within 90 days
Question count and passing scoreNot published

SFD's packet lists the reference books for each type. For FEX it is NFPA 10 (2018) plus parts of the 2021 Seattle Fire Code. Our FEX exam topics guide goes through them.

Renewal and the three-year re-test

A certificate is good for one year. You can renew it free for two more years by filing SFD's renewal application each year. After three years you must pass the exam again and pay $515. Changing employers does not mean retaking the exam. A replacement card is $70.

How to apply and book

  1. Download the exam application from SFD's Certification Testing page.
  2. Pay the $515 fee online through SFD's permit portal, or by check to the City of Seattle. Payment can be made in advance (it must be used within 60 days) or at the exam.
  3. Email the Certification Unit at SFD_FMO_Certification@seattle.gov, or call, to book a slot.
  4. Bring picture ID on the day. The exam day guide covers the rest.

Next steps

Try the free 10-question Seattle FEX sample test to see where you stand on NFPA 10. If you also work outside the city, our Washington fire protection licensing guide covers the statewide sprinkler, fire alarm and special hazards rules.

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass Seattle Fire Department Certifications?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

Seattle Fire Department Certification Exam Day: Scheduling, ID, Timing and Re-tests

Seattle Fire Department Certification Exam Day: Scheduling, ID, Timing and Re-tests

What to expect at a Seattle Fire Department certification exam: booking with the Certification Unit, test days and times, the $515 fee, picture ID, the one-hour closed-book format and the 90-day re-test.

Nov 18, 2026 · 3 min readSeattle Fire Department Certifications
Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

What the Seattle Fire Department FEX-1 to FEX-4 exams draw on: NFPA 10 (2018) selection and placement, inspection and maintenance, hydrostatic testing, plus the Seattle Fire Code sections SFD lists, and how to study for a one-hour closed-book exam.

Nov 18, 2026 · 4 min readSeattle Fire Department Certifications
Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Who needs a Seattle Fire Department certificate of competency, the 22 SFD certificate types (FEX, E-4KH, FA-1, FA-ITM, AS-3 and more), the $515 closed-book exam, the state prerequisites and the three-year re-test.

Nov 18, 2026 · 5 min readSeattle Fire Department Certifications