Fire Cert Academy
Back to blog
Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

What the Seattle Fire Department FEX-1 to FEX-4 exams draw on: NFPA 10 (2018) selection and placement, inspection and maintenance, hydrostatic testing, plus the Seattle Fire Code sections SFD lists, and how to study for a one-hour closed-book exam.

November 18, 20264 min readSeattle Fire Department Certifications
Contents

Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

Every Seattle Fire Department FEX certificate (FEX-1, FEX-2, FEX-3 and FEX-4) lists the same study material in SFD's certification packet:

SFD does not say how the questions split between these, how many there are, or what score passes. What it does say is that the exam is closed book and you get one hour. So you need to know NFPA 10 well, not just know where to find things in it.

NFPA 10 (2018), chapter by chapter

Chapters 4 to 6: classification, selection, distribution and installation. Know the classes of fire (A, B, C, D and K) and what each rating means. Selection follows the hazard (Section 5.1 lists the factors: the type and size of fire most likely to occur, the hazards in the area, energized electrical equipment and more). Distribution sets the maximum travel distances and the minimum sizes for light, ordinary and extra hazard occupancies (Table 6.2.1.1). Learn the mounting rules by number. An extinguisher with a gross weight of 40 lb or less is mounted with its top no more than 5 ft above the floor. A heavier one, other than wheeled types, is mounted with its top no more than 3 1/2 ft above the floor. The bottom is never less than 4 in. off the floor (6.1.3.8).

Chapter 7: inspection, maintenance and recharging. This is the core of FEX-2 and FEX-4. An extinguisher is inspected manually when first placed in service, then manually or by electronic monitoring at intervals not exceeding 31 days (7.2.1.2). Section 7.2.2 lists what each inspection checks: location, visibility, access, the gauge reading, the seal and so on. Annual maintenance includes the external examination for damage, corrosion and nozzle blockage (7.3.2.1). Internal examination intervals vary by type (Table 7.3.3.1). Stored-pressure loaded stream units, for example, are examined internally every year. Then there are the six-year maintenance rule, recharging agents, and the service tags and verification-of-service collars (7.11).

Chapter 8: hydrostatic testing. This is the whole of FEX-3. Know which cylinders and components get tested (8.1.1, 8.3.3.1 for hose assemblies with shutoff nozzles), the test intervals in Table 8.3.1, test pressures, the equipment and procedure, what makes a cylinder fail, and how a passed test is recorded.

The Seattle Fire Code sections

Section 906 is where the fire code says where extinguishers are required. Chapters 1 and 2 cover the code official's authority, permits, violations and definitions. Section 2005 is the aviation facilities chapter's rule on portable extinguishers.

Seattle adopts the International Fire Code with its own amendments, so the base IFC text is not always what Seattle enforces. Read those sections in the Seattle Fire Code itself; the City publishes it free online. Our practice questions cover NFPA 10 only. We have not added Seattle Fire Code questions because we cannot yet confirm which of those sections Seattle left unamended.

How to study for a closed-book hour

  1. Start with Chapter 7. Inspection and maintenance cover the most day-to-day work, and every FEX type touches them.
  2. Memorize the numbers: inspection intervals, internal examination and hydrostatic intervals by type, mounting heights, travel distances.
  3. Read the listed Seattle Fire Code sections twice, slowly. They are short.
  4. Practise against the clock. Our practice exam is 50 questions in 60 minutes. That count is ours, not SFD's, but it trains the pace.

Our Seattle FEX practice exams are written on NFPA 10 (2018) and explain every answer with its section. Try the free 10-question sample first. For who needs which certificate and how to book, see the Seattle Fire Department certification requirements; for the day itself, the exam day guide.

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass Seattle Fire Department Certifications?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

Seattle Fire Department Certification Exam Day: Scheduling, ID, Timing and Re-tests

Seattle Fire Department Certification Exam Day: Scheduling, ID, Timing and Re-tests

What to expect at a Seattle Fire Department certification exam: booking with the Certification Unit, test days and times, the $515 fee, picture ID, the one-hour closed-book format and the 90-day re-test.

Nov 18, 2026 · 3 min readSeattle Fire Department Certifications
Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

Seattle FEX Exam Topics: What the Fire Extinguisher Certificate Exam Covers (NFPA 10, 2018)

What the Seattle Fire Department FEX-1 to FEX-4 exams draw on: NFPA 10 (2018) selection and placement, inspection and maintenance, hydrostatic testing, plus the Seattle Fire Code sections SFD lists, and how to study for a one-hour closed-book exam.

Nov 18, 2026 · 4 min readSeattle Fire Department Certifications
Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Seattle Fire Department Certification: Who Needs It, the Exam Types, Fees and Renewal

Who needs a Seattle Fire Department certificate of competency, the 22 SFD certificate types (FEX, E-4KH, FA-1, FA-ITM, AS-3 and more), the $515 closed-book exam, the state prerequisites and the three-year re-test.

Nov 18, 2026 · 5 min readSeattle Fire Department Certifications