
NICET Special Hazards Exam Topics: 2026 Content Weights for Levels I-IV and a Study Plan
What is on the updated NICET Special Hazards Systems exams (released November 2, 2026): domain weights for Levels I-IV, the NFPA 12, 2001, 11, 72 and 70 editions each level uses, and a study plan built on the weights.
Contents
NICET Special Hazards Exam Topics: 2026 Content Weights for Levels I-IV and a Study Plan
NICET released updated Special Hazards Systems (SHS) exams for all four levels on November 2, 2026. With this update SHS became, in NICET's words, the last of its fire protection programs to put the NFPA standards on screen. The exams reference NFPA 72 (2022), NFPA 70 (2020), NFPA 12 (2022), NFPA 2001 (2022), NFPA 11 (2024) and NFPA 76 (2024).
The weights below are from NICET's updated SHS content outlines and candidate handbook, and the exam lengths are from the program page. Question ranges are the percentage ranges applied to the exam length, so treat them as estimates.
Level I: 86 questions, 140 minutes
| Domain | Share | Approx. questions |
|---|---|---|
| Inspection, Testing, and Maintenance | 35-45% | 30-39 |
| Repair and Recharge | 7-17% | 6-15 |
| Installation | 15-25% | 13-22 |
| System Design and Configuration | 8-18% | 7-15 |
| Safety | 10-20% | 9-17 |
Level I ITM is identification and visual inspection: system types and components, detection and mechanical locations, construction changes, activating initiating devices, checking agent quantity or pressure, and inspecting cylinders, hoses, piping and hangers. Installation covers reading shop drawings, raceways and conduit, piping, air sampling pipe and mounting components.
Level II: 144 questions, 170 minutes
| Domain | Share | Approx. questions |
|---|---|---|
| Inspection, Testing, and Maintenance | 20-30% | 29-43 |
| Installation | 18-28% | 26-40 |
| Commissioning | 6-16% | 9-23 |
| Repair and Recharge | 10-20% | 14-29 |
| System Design and Configuration | 7-17% | 10-24 |
| Work Management | 2-12% | 3-17 |
| Safety | 3-13% | 4-19 |
Level II adds the testing and commissioning work: circuit integrity, smoke detector sensitivity, notification audibility and visibility, foam concentrate sampling, standby power, room integrity tests, pipe puff and pressure tests, air-sampling transport times, sequence-of-operations and acceptance tests, cylinder testing and recharging clean agent cylinders and foam tanks.
Level III: 91 questions, 200 minutes
| Domain | Share | Approx. questions |
|---|---|---|
| Inspection, Testing, and Maintenance | 1-10% | 1-9 |
| Repair and Recharge | 5-15% | 5-14 |
| Installation | 5-15% | 5-14 |
| System Design | 25-35% | 23-32 |
| System Configuration | 21-31% | 19-28 |
| Work Management | 9-19% | 8-17 |
| Safety | 1-10% | 1-9 |
More than half of Level III is design and configuration: choosing the system type and agent for a hazard, building a programming matrix, flow calculations for gaseous agents and low-expansion foam (the outline names software for both), navigating listings for foam design, and selecting and laying out detection, power supplies, wiring, piping and nozzles, releasing devices, agent storage, air sampling, notification and manual release. The ITM domain shrinks to specialty tests such as low-pressure CO2 partial flow, foam bladder integrity and proportioning accuracy.
Level IV: 63 questions, 140 minutes
| Domain | Share | Approx. questions |
|---|---|---|
| System Design and Configuration | 48-58% | 30-37 |
| Work Management | 30-40% | 19-25 |
| Safety | 7-17% | 4-11 |
Level IV is the senior design and management exam: interpreting NFPA codes, designing complex systems, protecting dust collection and applying explosion prevention, writing installation specifications, deciding whether a performance-based design is appropriate, choosing the system type, negotiating contracts, budgeting and cost control, and OSHA and insurance compliance. Like Level III, it allows a little over two minutes per question.
The references
You may bring printed copies of the "bring" list, and the same standards are available on screen in a view-only format. "Study only" titles are not allowed in the test center.
| Level | Bring and on screen | Study only (selected) |
|---|---|---|
| I | NFPA 12 (2022), NFPA 70 (2020), NFPA 72 (2022), NFPA 2001 (2022) | NFPA 11 (2024), NFPA 13, NFPA 58, NFPA 75, NFPA 170, CGA C-6, OSHA 1910 and 1926, Ugly's (7th) |
| II | NFPA 11 (2024), NFPA 12 (2022), NFPA 70 (2020), NFPA 72 (2022), NFPA 2001 (2022) | NFPA 1, 3, 17, 17A, 25, 750, 2010; FSSA Pipe Design Guide; Construction Management JumpStart; 49 CFR |
| III | NFPA 11 (2024), NFPA 12 (2022), NFPA 72 (2022), NFPA 76 (2024), NFPA 2001 (2022) | NFPA 17, 17A, 25, 55, 70; AIA A201; Construction Management JumpStart; OSHA 1910 |
| IV | NFPA 11 (2024), NFPA 12 (2022), NFPA 70 (2020), NFPA 2001 (2022) | NFPA 68, 69, 660, 72, 101, 1; IBC (2021); AIA A201; CSI MasterFormat; OSHA 1904 and 1910 |
Two patterns matter. NFPA 2001 (clean agents) and NFPA 12 (CO2) are permitted at every level, and NFPA 11 (foam) from Level II up. And several system types named in NICET's experience requirements, such as dry chemical (NFPA 17), water mist (NFPA 750) and aerosols (NFPA 2010), have study-only standards, so that knowledge has to come with you.
A study plan built on the weights
- Start with NFPA 2001 and NFPA 12. They are on screen at every level. Learn their structure: design concentrations, quantity calculations, discharge times, enclosure integrity and ITM chapters.
- At Level I, live in ITM and installation. Together they are 50-70% of the exam. Know components by sight and what a visual inspection checks.
- At Level II, study commissioning procedures step by step. Room integrity, pipe puff, sequence-of-operations and acceptance tests are named tasks, and the commissioning domain can be up to 16% of the exam on its own.
- Bring NFPA 72 into it. Detection, releasing circuits and notification run through every level, and NFPA 72 is permitted at Levels I-III.
- At Levels III and IV, think like the designer. Agent selection, hazard analysis and system configuration carry the exam, and Level IV adds explosion protection standards (NFPA 68 and 69) and combustible dust (NFPA 660) as study-only books.
- Don't neglect work management and safety. They are up to a quarter of Level II and as much as 57% of Level IV.
Practice against the outline
Our NICET Special Hazards practice tests cover Levels I through IV. Start with the free 10-question sample test. For background on the agents and standards, see our Special Hazards overview and what to expect from an SHS practice test. Eligibility is in SHS requirements, and test-center rules are in SHS exam day.
Sources
- NICET, SHS Level I-IV Content Outlines and Selected General References (updated exams released November 2, 2026), linked from the SHS program page
- NICET, NICET Updates Special Hazards Systems Certification Program, November 2026
- NICET, Special Hazards Systems Candidate Handbook, August 2026
Ready to pass NICET Special Hazards Systems?
Start your prep with unlimited practice tests and codebook-referenced answers.
Start Studying →
