Fire Cert Academy
Back to blog
Connecticut Business and Law Exam: Who Takes It, the One Book, and the Two-Year Rule

Connecticut Business and Law Exam: Who Takes It, the One Book, and the Two-Year Rule

Every Connecticut contractor, electrical, plumbing, heating and cooling, sprinkler and the rest, passes PSI's Business and Law exam. Who takes it, the $59 fee, 50 questions in 2 hours, the NASCLA Connecticut guide, and how long a pass counts.

November 16, 20265 min readConnecticut Contractor Business and Law
Contents

Connecticut Business and Law Exam: Who Takes It

Every Connecticut contractor license takes two PSI exams: a trade exam and Business and Law. The trade exam is different for each license. Business and Law is the same 50-question exam for everyone, whether you are becoming an E-1 electrical contractor, a plumbing or heating and cooling contractor, or a sprinkler contractor. It has no code questions. It tests running a contracting business, from estimating and contracts to taxes, labor law and liens, out of one open book.

Everything below comes from PSI's Connecticut Department of Consumer Protection, Occupational Licensing, Electrical Trades Candidate Information Bulletin, updated February 4, 2026.

Who has to take it?

PSI's bulletin is direct: Business and Law is "Required for ALL Contractor/Dealer Tech Licenses."

Your situationBusiness and Law?
Applying for a contractor license in any trade (E-1, a limited electrical contractor class, plumbing, heating and cooling, sprinkler and others)Yes, alongside your trade exam
Applying for a dealer-tech licenseYes
Licensed contractor adding another license, last Business and Law pass more than 2 years agoYes, plus the new trade exam
Licensed contractor adding another license, Business and Law passed within the last 2 yearsNo, only the new trade exam
Journeyperson, technician or driller applicantNo. Those licenses take only a trade exam

Because the exam is shared, PSI warns that it "may include questions that appear not to directly relate to your licensing category." An electrician can get a question that reads like it was written for a home improvement contractor. PSI says those questions test "your general ability to research information," which on an open-book exam means finding the answer in the guide.

The exam

ItemBusiness and Law
VendorPSI
Questions50 scored; PSI may add a few unscored questions, and their time counts against yours
Time2 hours
Passing score70% (35 of 50)
FormatComputer-based, open book, at a PSI test center
PSI fee$59 per attempt, not refundable or transferable

The 11 areas run from estimating and bidding (7 questions) and contracts (6) down to lien law and business organization (2 each). What is on the exam breaks them down.

The one book you may bring

There is exactly one reference: the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut, 6th Edition (revised June 2023, ISBN 978-1-948558-23-5). It is not the NASCLA "Basic" guide that other states use; the Connecticut edition adds chapters on Connecticut contractor licensing and registration and on Connecticut mechanics' lien law. NASCLA publishes it, and PSI's online store sells it for about $78.

You bring your own copy. You may highlight, underline, annotate and add permanent tabs before the exam. Post-it notes are not allowed, loose papers are confiscated, and questions and answers written into the book are prohibited. Exam day covers the rules.

The guide is from 2023

Connecticut and federal law have moved on a few of the guide's dollar figures and tax rules since its 2023 printing. PSI's bulletin settles conflicts this way: "a legal requirement such as a code, law or regulation overrides any other reference." If a question turns on a figure that has changed, the current law is the answer PSI scores. Our practice questions are checked against the guide, and the explanations flag where it is out of date.

How to apply

  1. Apply to the Department of Consumer Protection for your contractor license. Eligibility (experience, training and the application fee) depends on your trade. Electricians: see Connecticut E-1 requirements.
  2. Wait for approval. Your eligibility to test runs one year from the date the state approves your application.
  3. Schedule with PSI at test-takers.psiexams.com/ctot or (855) 746-8171, and pay $59 per portion.
  4. Pass both portions, Business and Law and your trade exam, at 70% each.
  5. Send your license fee to DCP with all your passing score reports. The fee is printed on the passing score report for your trade exam.

The two-year rule

A passed portion stays valid for two years from the date you pass it. In the bulletin's words, a contractor who passes Business and Law "has 2 years to pass the trade examination portion, before being required to retake that business portion again." So pass the two exams in either order, but don't let the second one drift.

Retakes

Pass rates

Connecticut does not publish Business and Law pass rates.

Which trade exam goes with it

Electrical contractors pair it with the E-1 trade exam: 100 questions in 4 hours on the NEC. See Connecticut E-1 requirements and what is on the E-1 exam. Other trades take their own trade exam and the same Business and Law.

Getting ready

Start with the outline, then practice finding answers in the guide under time. Try our free Business and Law sample test, or see the full Connecticut Business and Law exam prep.

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass Connecticut Contractor Business and Law?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

Connecticut Business and Law Exam Day: PSI, One Book, and Pacing 50 Questions in 2 Hours

Connecticut Business and Law Exam Day: PSI, One Book, and Pacing 50 Questions in 2 Hours

What to expect on Connecticut's contractor Business and Law exam with PSI: scheduling, the test centers, ID, how the NASCLA Connecticut guide may be marked and tabbed, the calculator rule, pacing, the 35-of-50 pass mark and two-day retakes.

Nov 16, 2026 · 5 min readConnecticut Contractor Business and Law
What's on the Connecticut Business and Law Exam? All 11 Areas and Where to Find Them in the Guide

What's on the Connecticut Business and Law Exam? All 11 Areas and Where to Find Them in the Guide

PSI's outline for the Connecticut contractor Business and Law exam: 50 questions across 11 areas, which chapters of the NASCLA Connecticut guide (6th edition) answer each one, the lien deadlines, and a study plan built on the counts.

Nov 16, 2026 · 6 min readConnecticut Contractor Business and Law
Connecticut Business and Law Exam: Who Takes It, the One Book, and the Two-Year Rule

Connecticut Business and Law Exam: Who Takes It, the One Book, and the Two-Year Rule

Every Connecticut contractor, electrical, plumbing, heating and cooling, sprinkler and the rest, passes PSI's Business and Law exam. Who takes it, the $59 fee, 50 questions in 2 hours, the NASCLA Connecticut guide, and how long a pass counts.

Nov 16, 2026 · 5 min readConnecticut Contractor Business and Law