Connecticut Contractor Business and Law
Practice exams for the Connecticut Contractor Business and Law exam, on the NASCLA Connecticut Guide (6th), weighted like the real outline.
Every plan includes
- 140+ practice questionsOn the NASCLA Connecticut Guide (6th), across all 11 content areas
- Unlimited 50-question timed exams2 h, the same length as the real exam
- Every answer cites the codeThe NASCLA Connecticut Guide (6th), with the section each answer comes from
What’s included
Every plan includes all of it. Plans differ only in how long you have access and how you are billed.
- Custom study sessionsPick how many questions and which areas to drill, and study untimed.
- Explanations that cite the codeEvery answer says why, with the code section it comes from.
- Weak-area analyticsYour results by area show what to study next.
- Real human supportEmail us any time and a person answers.
Choose your plan
Same full access on every plan. Pick how long you want it; cancel anytime.
How the real exam is built
The real exam: 50 questions across 11 areas in 2 h. Our timed exams use the same areas and weights.
You need 70% (35 of 50). These are the question counts in PSI’s bulletin; PSI may add a few unscored questions, and their time counts against yours. Our full-length practice exam draws from each area in the same proportions.
Business and Law exam
50 scored · 120 min- Licensing5
- Estimating and Bidding7
- Lien Law2
- Financial Management4
- Tax Laws5
- Labor Laws5
- Project Management5
- Contracts6
- Business Organization2
- Risk Management4
- Environmental and Safety5
About the Connecticut Contractor Business and Law
Granted by Connecticut Department of Consumer Protection
Connecticut Department of Consumer Protection Business and Law exam (PSI), required of every Connecticut contractor: 50 questions in 2 hours, open book on the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th Edition, 70% to pass.
Eligibility Requirements
No separate experience requirement. PSI’s bulletin requires Business and Law for every Connecticut contractor and dealer-tech license, so you qualify through the Department of Consumer Protection’s approval for your contractor license: E-1, a limited electrical contractor class, or a plumbing, heating and cooling, sprinkler or other trade. Journeypersons do not take it.
Scheduling & Fees
Where to take it
- Administered by
- PSI
- Phone
- (855) 746-8171
- Scheduling window
- Your eligibility runs one year from the date the state approves your application. A passed portion stays valid for two years: pass Business and Law, and you have two years to pass the trade exam before you must retake it. A licensed contractor adding a license retakes Business and Law only if their last pass is more than two years old.
- Reschedule policy
- Free to cancel or reschedule if you do it at least two days before the exam; otherwise the $59 fee is lost.
- Retake policy
- You need 70% (35 of 50). There is no limit on attempts; you cannot rebook the same day, but you can retest as soon as two days later. PSI charges $59 for each attempt.
Fees
- Business and Law exam fee, each attempt (PSI, not refundable)
- $59
- Trade exam fee, each attempt (PSI)
- $59
Keeping Your Certification Active
Renewal requirements
- Cycle
- Business and Law is not renewed. Once licensed, you renew your contractor license itself (an E-1 renews every year, for $150).
Sources: PSI Candidate Information Bulletin, Connecticut Electrical Trades (updated 2/4/2026) · NASCLA: Contractors Guide to Business, Law and Project Management · Conn. Gen. Stat. chapter 847, liens
Frequently asked questions
Who has to take the Business and Law exam?+
Every Connecticut contractor. PSI’s bulletin says it is required for all contractor and dealer-tech licenses, so an E-1 electrical contractor, a limited electrical contractor, and plumbing, heating and cooling, sprinkler and other trade contractors all take the same exam, alongside their own trade exam. Journeypersons take only a trade exam.
How is the exam structured?+
Fifty questions in 2 hours, open book, at a PSI test center, and you need 70%, or 35 correct. Estimating and bidding is the largest area at 7 questions, then contracts at 6; licensing, tax laws, labor laws, project management, and environmental and safety at 5 each; financial management and risk management at 4; and lien law and business organization at 2.
Which book can I bring?+
Only one: the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut, 6th edition. You may highlight, underline, annotate and add permanent tabs before the exam. Post-it notes, loose papers and questions and answers written into the book are not allowed, and you may not write in it during the exam. A silent, non-programmable calculator is allowed.
I’m a plumbing or HVAC contractor. Is this the right exam?+
Yes. Business and Law is the same exam for every Connecticut contractor, whatever the trade. PSI warns that some questions may not seem to relate to your license category; they test your ability to find information in the guide. Our practice exam follows that one outline.
Where do your questions come from?+
Every question is checked against the NASCLA Connecticut guide, 6th edition, and its explanation cites the chapter section it comes from, so you practice finding the answer in the book you bring.
Is the 2023 guide out of date?+
On a few points, yes: some dollar thresholds and tax rules in Connecticut and federal law have changed since the 2023 printing. PSI’s bulletin says that where references conflict, a legal requirement such as a code, law or regulation overrides any other reference. Our explanations flag the places where the guide is out of date.
What does it cost, and what if I fail?+
PSI charges $59 for each attempt, and the fee is not refundable. You can take it as many times as you need. You cannot rebook the same day, but you can retest as soon as two days later: fail on a Wednesday, call Thursday, retest Friday. If you fail, you see a report of your weak areas and get 30 minutes to review the questions you missed.
How long does a pass count?+
Two years. A contractor who passes Business and Law has two years to pass the trade exam before having to take Business and Law again. A licensed contractor adding another license retakes it only if their last pass is more than two years old. Your state eligibility to test runs one year from approval.
Can I take it online?+
No. PSI gives it at test centers: West Hartford and Milford in Connecticut, four Massachusetts sites, or other PSI centers. Schedule at test-takers.psiexams.com/ctot or by phone at (855) 746-8171.
Is this included with the E-1 practice exam?+
No. Business and Law is a separate product from our Connecticut E-1 trade exam prep, because the two are separate PSI exams with separate references: the NEC for the trade exam, the NASCLA Connecticut guide for Business and Law.
Study guides for this exam

Connecticut Business and Law Exam Day: PSI, One Book, and Pacing 50 Questions in 2 Hours
What to expect on Connecticut's contractor Business and Law exam with PSI: scheduling, the test centers, ID, how the NASCLA Connecticut guide may be marked and tabbed, the calculator rule, pacing, the 35-of-50 pass mark and two-day retakes.

What's on the Connecticut Business and Law Exam? All 11 Areas and Where to Find Them in the Guide
PSI's outline for the Connecticut contractor Business and Law exam: 50 questions across 11 areas, which chapters of the NASCLA Connecticut guide (6th edition) answer each one, the lien deadlines, and a study plan built on the counts.

Connecticut Business and Law Exam: Who Takes It, the One Book, and the Two-Year Rule
Every Connecticut contractor, electrical, plumbing, heating and cooling, sprinkler and the rest, passes PSI's Business and Law exam. Who takes it, the $59 fee, 50 questions in 2 hours, the NASCLA Connecticut guide, and how long a pass counts.
Ready to pass your exam?
Practice the full exam on the current code, with every calculation worked out.
Start Studying Today →