Fire Cert Academy
Back to blog
NICET ITWBS Exam Topics: Content Weights for Levels I-III and a Study Plan

NICET ITWBS Exam Topics: Content Weights for Levels I-III and a Study Plan

What is on the NICET Inspection and Testing of Water-Based Systems exams: published domain weights for Levels I, II and III, the NFPA 25 (2023) and other editions each level uses, and a study plan built on the weights.

November 16, 20265 min readNICET I&T of Water-Based Systems
Contents

NICET ITWBS Exam Topics: Content Weights for Levels I-III and a Study Plan

NICET updated its Inspection and Testing of Water-Based Systems (ITWBS) exams in 2025: Levels I and II on June 2, 2025, and Level III on December 1, 2025. All three are now built on NFPA 25 (2023). Below are the domain weights from NICET's current content outlines, with question ranges based on the exam lengths on the program page; treat the ranges as estimates.

Level I: 115 questions, 125 minutes

DomainShareApprox. questions
Safety5-15%6-17
Identify Condition and Operation of System Components32-43%37-49
Prepare Preliminary Documentation17-27%20-31
Operate Components Under Direct Supervision26-36%30-41

Level II: 168 questions, 185 minutes

DomainShareApprox. questions
Safety5-15%8-25
Communication5-15%8-25
Perform, Document, and Interpret Intermediate ITM Tasks30-40%50-67
Perform, Document, and Interpret ITM Tasks for Water Supplies25-35%42-59
Internal Obstruction Investigation10-20%17-34

At 168 questions in 185 minutes, this is NICET's longest fire protection exam by question count, about 66 seconds per question.

Level III: 145 questions, 155 minutes

DomainShareApprox. questions
Deluge and Preaction Systems20-30%29-44
Foam Systems5-15%7-22
Water Mist and Water Spray Systems4-14%6-20
Pressure-Reducing Valves10-20%14-29
Internal Obstruction Investigation15-25%22-36
Interpret Flow Test Results12-22%17-32
Automated Inspection and Testing1-9%1-13

Level III is about specialty systems and analysis: ITM on deluge, preaction, foam, water mist, water spray and pressure-reducing valves; supervising obstruction investigations; analyzing five-year standpipe flow tests, private fire service main flow tests, backflow preventer forward flow tests and pump tests; and evaluating automated inspection and testing equipment and frequencies.

The references

LevelYou may bringOn screenStudy only
INFPA 25 (2023), OSHA 29 CFR 1910NFPA 25 (2023)NFPA 13 (2022), NFPA 20 (2022), NFPA 72 (2022), OSHA 29 CFR 1926
IINFPA 20 (2022), NFPA 25 (2023), NFPA 72 (2022), NFPA 291 (2022)Same fourNFPA 13 (2022), OSHA 1910 and 1926
IIINFPA 11 (2021), NFPA 14 (2019), NFPA 25 (2023), NFPA 72 (2022), NFPA 291 (2022)Same fiveNFPA 13 (2022)

NFPA 25 is the backbone at every level. NFPA 20 joins at Level II for fire pump testing, NFPA 291 for flow testing, NFPA 72 for alarm and supervisory devices, and at Level III NFPA 11 for foam and NFPA 14 for standpipe flow tests. Note that OSHA 1910 is a permitted book at Level I but is not on screen, so bring a copy if you want it.

A study plan built on the weights

  1. Learn NFPA 25's structure first. Each system type has its own chapter with an inspection, testing and maintenance summary table. Finding the right table fast is the single biggest time saver on all three exams.
  2. At Level I, focus on identifying and operating components. Together those two domains are 58-79% of the exam. Know your valves, gauges and alarm devices by sight and by name.
  3. At Level II, split time between systems and water supplies. Intermediate tasks and water supplies are up to three quarters of the exam. Add NFPA 20 for pump tests and NFPA 291 for hydrant flow tests.
  4. Treat obstruction investigation as a real topic. It is 10-20% of Level II and 15-25% of Level III, and it comes from NFPA 25's requirements for assessing the internal condition of piping.
  5. At Level III, practice reading test results, not just performing tests: pump curves, flow test data and backflow forward flow results.
  6. Don't neglect safety and communication at Level II. They can be up to 30% of the exam combined.

Practice against the outline

Our NICET ITWBS practice tests cover Levels I through III. Start with the free 10-question sample test. Our earlier article on what to expect on the ITWBS exam has more on deficiency-identification questions. Eligibility is in ITWBS requirements, and test-center rules are in ITWBS exam day.

Sources

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass NICET I&T of Water-Based Systems?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

NICET ITWBS Exam Day: Pearson VUE Check-In, NFPA 25 Rules, Pace, and Results

NICET ITWBS Exam Day: Pearson VUE Check-In, NFPA 25 Rules, Pace, and Results

What to expect at a NICET Inspection and Testing of Water-Based Systems exam: Pearson VUE ID rules, the NFPA books you can bring and use on screen at each level, time per question, online Level I, scoring and retakes.

Nov 16, 2026 · 5 min readNICET I&T of Water-Based Systems
NICET ITWBS Exam Topics: Content Weights for Levels I-III and a Study Plan

NICET ITWBS Exam Topics: Content Weights for Levels I-III and a Study Plan

What is on the NICET Inspection and Testing of Water-Based Systems exams: published domain weights for Levels I, II and III, the NFPA 25 (2023) and other editions each level uses, and a study plan built on the weights.

Nov 16, 2026 · 5 min readNICET I&T of Water-Based Systems
NICET Inspection and Testing of Water-Based Systems Requirements: Experience, Fees, and How to Apply

NICET Inspection and Testing of Water-Based Systems Requirements: Experience, Fees, and How to Apply

What NICET ITWBS Levels I, II and III require: inspection and testing experience by level, what maintenance and related work counts, the Level III recommendation, 2026 fees, how to apply, and recertification.

Nov 16, 2026 · 5 min readNICET I&T of Water-Based Systems