Fire Cert Academy
Back to blog
NICET IB-PSC Exam Topics: Content Weights for Levels I-III and Design, and a Study Plan

NICET IB-PSC Exam Topics: Content Weights for Levels I-III and Design, and a Study Plan

What is on the NICET In-Building Public Safety Communications exams: published domain weights for Levels I, II, III and Design, the NFPA 1225, ERCES Handbook, IFC and FCC Part 90 references, and a study plan built on the weights.

November 16, 20266 min readNICET In-Building Public Safety Communications
Contents

NICET IB-PSC Exam Topics: Content Weights for Levels I-III and Design, and a Study Plan

NICET's In-Building Public Safety Communications (IB-PSC) exams were last updated on December 2, 2024, when questions that referenced NFPA 1221 (2019) were moved to NFPA 1225 (2022). There are four exams: Levels I, II and III on the installation track, and a separate Design exam. NICET built the blueprints from a 2020 job task analysis, validated by a survey of 246 ERCES professionals.

The weights below are from NICET's 2024 content outlines, and the exam lengths are from the program page. Question ranges are the percentage ranges applied to the exam length, so treat them as estimates.

Level I: 88 questions, 110 minutes

DomainShareApprox. questions
Performing Rough Installation Activities50-60%44-53
Performing Finish and Trim Out Installation Activities40-50%35-44

Level I is entirely installation. Rough-in covers reading RF installation documents, installing cable (support, firestopping, grounding), terminating cable and installing passive equipment. Finish and trim-out covers the donor antenna, active equipment, the dedicated annunciator and the battery backup unit.

Level II: 143 questions, 155 minutes

DomainShareApprox. questions
Defining the Project Scope15-25%21-36
Evaluating RF Signal Strength and Quality20-30%29-43
Performing Rough Installation Activities15-25%21-36
Performing Finish and Trim Out Installation Activities10-20%14-29
Performing Commissioning, Acceptance Test, and Maintenance Activities20-30%29-43

Level II adds RF work and commissioning: reading specifications, drawings and schedules; measuring signal strength and quality and troubleshooting RF performance; testing cable and validating passive, electrical and grounding installation; the fire alarm interface; adjusting headend and remote amplification; and testing system alarms and the battery backup.

Level III: 126 questions, 170 minutes

DomainShareApprox. questions
Defining the Project Scope15-25%19-32
Evaluating RF Signal Strength and Quality30-40%38-50
System Design and Layout30-35%38-44
Performing Commissioning, Acceptance Test, and Maintenance Activities5-15%6-19

At Level III, scope means obtaining authorization from both the FCC licensee and the AHJ. RF work includes choosing test equipment, identifying interference and grading and documenting signal strength and quality. Design and layout covers parameters for design software, validating BDA and non-BDA equipment choices, planning the headend, finalizing the layout, validating the bill of materials and executing the permit process.

Design: 110 questions, 150 minutes

DomainShareApprox. questions
Defining the Project Scope15-25%16-28
Evaluating RF Signal Strength and Quality25-35%28-38
Designing the System45-55%50-60

The Design exam is about half system design: entering parameters into design applications, selecting equipment, planning the headend, determining layout, creating the bill of materials and generating submittal packages. RF evaluation focuses on interpreting results, interference and field observations.

The references

These are the titles NICET permits you to bring into the test center. NICET's reference sheets add that acceptable references may be copied in whole or in part, as long as they follow the binding and tabbing rules.

ExamPermitted references
Level INFPA 1225 (2022), NFPA 70 (2020), Complete ERCES Handbook (2023), International Fire Code (2018), Indoor Radio Planning (3rd ed.)
Level IIComplete ERCES Handbook (2023), NFPA 1225 (2022), NFPA 70 (2020), International Fire Code (2018), Indoor Radio Planning (3rd ed.)
Level IIIComplete ERCES Handbook (2023), NFPA 1225 (2022), 47 CFR Part 90 (FCC Part 90), International Fire Code (2018), Indoor Radio Planning (3rd ed.)
DesignNFPA 1225 (2022), 47 CFR Part 90, Complete ERCES Handbook (2023), International Fire Code (2018), Indoor Radio Planning (3rd ed.)

NICET's IB-PSC program page also says NFPA codes and standards are available on screen in a view-only format. The study-only lists (not allowed in the test center) include NFPA 72 (2019), the IBC (2018), the NPSTC in-building best practices paper, NTIA report TR-11-480, Construction Management JumpStart and the PMBOK Guide at Level II, and FCC guidance on signal booster obligations at Level III.

A study plan built on the weights

  1. Learn NFPA 1225's in-building chapter and the IFC's ERCES section first. They set the coverage, signal strength, battery and monitoring requirements that the exams test at every level.
  2. At Level I, focus on installation practice. Cable support, firestopping, grounding and terminations are half the exam; donor antenna and active equipment installation are most of the rest.
  3. From Level II, get comfortable with RF numbers. Signal strength and quality evaluation is 20-40% of Levels II, III and Design. Practice dB math, link budgets and reading test results, using the built-in scientific calculator.
  4. Know the commissioning sequence at Level II. Acceptance testing, amplifier adjustment, alarm and battery tests are up to 30% of the exam.
  5. For Level III and Design, add FCC Part 90. The licensee authorization task and signal booster rules come from it, and it is a permitted reference at both.
  6. Use the Complete ERCES Handbook as your map. It is permitted at every level and ties the codes to field practice.

Practice against the outline

Our NICET IB-PSC practice tests cover Levels I-III and Design. Start with the free 10-question sample test. For more on ERCES, DAS and BDA topics, read what to expect on the IB-PSC exam. Eligibility is in IB-PSC requirements, and test-center rules are in IB-PSC exam day.

Sources

BC
Brandon Carlton
Founder, Fire Cert Academy

Ready to pass NICET In-Building Public Safety Communications?

Start your prep with unlimited practice tests and codebook-referenced answers.

Start Studying →

Related reading

NICET IB-PSC Exam Day: Pearson VUE Check-In, Permitted References, Timing, and Results

NICET IB-PSC Exam Day: Pearson VUE Check-In, Permitted References, Timing, and Results

What to expect at a NICET In-Building Public Safety Communications exam: Pearson VUE ID rules, the references you can bring (including copies), time per level, online Level I, the built-in calculator, scoring and retakes.

Nov 16, 2026 · 6 min readNICET In-Building Public Safety Communications
NICET IB-PSC Exam Topics: Content Weights for Levels I-III and Design, and a Study Plan

NICET IB-PSC Exam Topics: Content Weights for Levels I-III and Design, and a Study Plan

What is on the NICET In-Building Public Safety Communications exams: published domain weights for Levels I, II, III and Design, the NFPA 1225, ERCES Handbook, IFC and FCC Part 90 references, and a study plan built on the weights.

Nov 16, 2026 · 6 min readNICET In-Building Public Safety Communications
NICET In-Building Public Safety Communications (IB-PSC) Requirements: Experience, Fees, and How to Apply

NICET In-Building Public Safety Communications (IB-PSC) Requirements: Experience, Fees, and How to Apply

What NICET IB-PSC Levels I-III and the Design certification require: ERCES, signal booster and DAS experience by level, what related work counts, recommendations, 2026 fees, how to apply and recertification.

Nov 16, 2026 · 5 min readNICET In-Building Public Safety Communications