
What's on the CSA FPU2 Fire Pump Exam: NFPA 20, 25, the NEC and Pump Hydraulics
The books and editions for CSA's FPU2 Fire Pump Installation & Service exam, what the NFPA 20, NFPA 25, NEC and OSHA questions cover, the pump hydraulics you need, and a study plan for the two references you cannot bring in.
Contents
What's on the CSA FPU2 Fire Pump Exam
CSA's FPU2 Fire Pump Installation & Service exam is 100 questions in 2.5 hours, open book, with an 80% pass mark. CSA says "the majority of questions come from NFPA 20." The rest come from the standards a pump touches: NFPA 25 for inspection, testing and maintenance, NFPA 13 where NFPA 20 refers to it, NFPA 72 for pump monitoring, and the NEC. There are also general hydraulics questions on pressure, flow, friction loss and elevation.
CSA publishes no topic weights beyond "the majority" from NFPA 20. Questions are drawn at random from a larger bank, so two candidates may not see the same exam.
The books, and which ones you can bring
| Book | Edition CSA lists | What it is tested for | Allowed in the room? |
|---|---|---|---|
| NFPA 20 | 2022 (handbook recommended) | Pump installation, drivers, controllers, acceptance testing | Yes |
| NFPA 25 | 2020 | Fire pump inspection, testing and maintenance | Yes |
| NFPA 13 | 2019 | The sections NFPA 20 points to | Yes |
| NFPA 72 | 2019 | Monitoring of fire pumps | Yes |
| NFPA 70 (NEC) | 2020 | Working clearances, electrical hazards, Article 695 | No |
| OSHA control of hazardous energy | CSA links OSHA's lockout/tagout booklet | Lockout/tagout | No |
| CSA FPU2 study guide | Revised August 14, 2024 | Sample questions, NEC clearance table | Yes |
That table matters more for FPU2 than for any other CSA exam. The study guide says there may be NEC questions on clearances and Article 695, and lockout/tagout questions, "however, neither the NEC or Control of Hazardous Energy are allowed in the exam." You have to know that material, because you can't look it up.
There is one partial way around it. The study guide itself is allowed in, and it ends with an NEC table of the working space required in front of exposed electrical equipment. Print the guide, bind it and tab that page.
A note on our practice questions. Our FPU2 practice exam, which we are adding now, is written on exactly the editions CSA lists: NFPA 20 (2022), 25 (2020), 13 (2019), 72 (2019) and the 2020 NEC, plus OSHA lockout/tagout. CSA's sprinkler page says FPU2 has "not yet" been updated to newer codes, so watch for a new study guide before you book.
NFPA 20: the core of the exam
CSA's list of FPU2 concepts starts with NFPA 20:
- Drivers: electric, diesel and steam turbine pumps, and what each needs.
- Controllers: what the controller does, how it starts and stops the pump, and its alarms.
- Acceptance testing: what is tested when a new pump goes into service.
- Installation: suction and discharge arrangements, and the parts of NFPA 13 that NFPA 20 refers to.
CSA says questions can come from the body of a standard or any annex, and from "general theory as necessary to have a thorough understanding of fire pump installations." Read the annex notes as well as the body text.
NFPA 25: testing pumps in service
All five sample questions in CSA's guide come from NFPA 25, and they show the level of detail to expect:
- whether qualified personnel must attend a running pump, and the exception for automated testing with automatic diesel shutdown;
- how quickly personnel must be able to reach the pump when an automated no-flow test is remotely monitored;
- what to do when the suction supply can't support a flow of 150% of rated capacity;
- how often an inline flow meter must be calibrated if it is used for the annual test; and
- how often a hose stream test is still needed when closed-loop flow meters are used.
Tab the fire pump chapter of NFPA 25, especially the no-flow and annual flow tests and the rules for flow meters.
NEC, NFPA 72 and OSHA
- NEC: Article 695 (fire pumps), the working space in front of electrical equipment, and general electrical hazards. You can't bring the NEC, so learn Article 695 well enough to answer without it.
- NFPA 72: how a fire alarm system monitors a fire pump.
- OSHA lockout/tagout: controlling hazardous energy before working on a pump or controller. CSA links its lockout/tagout material from the FPU2 listing, but you can't bring it in.
The hydraulics
CSA lists "friction loss, flow, pressures, and elevation impacts associated with fire pumps" as a core concept. Questions give you the numbers. You need to know which operation to apply. Three patterns from CSA's sprinkler study material carry straight over, shown here with our own numbers:
- Elevation. Each foot of water column is 0.433 psi. A hose outlet 60 feet above the pump discharge loses 60 × 0.433 = 26.0 psi to elevation.
- Friction loss. Multiply the loss per foot by the equivalent length. At 0.05 psi per foot over 180 feet of equivalent pipe, the loss is 0.05 × 180 = 9.0 psi.
- Churn and suction pressure. A pump adds its pressure to whatever is on the suction side. Say a pump is rated at 80 psi and the question says its churn is 120% of rated. Its churn pressure is 80 × 1.2 = 96 psi. With a 45 psi static suction supply, the discharge at churn is 96 + 45 = 141 psi. That figure drives pipe and fitting pressure ratings.
Bring a basic non-programmable calculator to a testing center. Online, you get an on-screen one.
A study plan
- Get the editions CSA lists, ideally the NFPA 20 handbook, and print and bind the CSA study guide.
- Read NFPA 20 cover to cover. It is the majority of the exam. Tab drivers, controllers and acceptance testing.
- Read the NFPA 25 fire pump chapter and work CSA's five sample questions against it.
- Study NEC Article 695 and lockout/tagout until you know them without the book. Make flash cards. These are the questions you can't look up.
- Practice the three hydraulics patterns until each takes under a minute.
- Sit full timed exams. At 90 seconds a question, your tabs decide how many lookups you can afford. Exam day covers pacing.
Practice that matches the exam
We are adding a timed FPU2 exam (100 questions, 2.5 hours, the 80% mark, on the editions CSA lists) to our CSA fire protection practice exams, which already cover KHFE2, FEX, CKH2 and PEG2. Try the free sample test, or read who needs FPU2.
Sources: CSA's Sprinklers page and its Study and Test Material for the FPU2 Assessment (March 1, 2023, revised August 14, 2024), read November 2026. The hydraulics examples use our own numbers to show the methods in CSA's sprinkler study guide. CSA does not publish topic weights. The emphasis here is our reading of the study guide, not CSA's.
Ready to pass CSA Fire Protection Exams (KHFE2, FEX, CKH2, PEG2)?
Start your prep with unlimited practice tests and codebook-referenced answers.
Start Studying →
