Fire Cert Academy
Connecticut electrician exams

Connecticut E-1 Electrical Contractor

Practice the Connecticut E-1 Electrical Contractor exam the way it is given — 100 questions weighted like the real outline, on the 2020 NEC, with every answer explained and cited.

70%
minimum score to pass
16
content areas on one 100-question exam
240+
practice questions on the 2020 NEC

One exam, 100 questions

You need 70% (70 of 100) on the trade exam. These are the question counts in PSI’s bulletin; PSI adds 1 to 10 unscored questions, and their time counts against yours. Contractors must also pass PSI’s separate 50-question Business and Law exam (2 hours, 70%), open book on the NASCLA Connecticut guide. This product covers the trade exam; our Business and Law prep is coming. Our full-length practice exam draws from each trade area in the same proportions.

E-1 Unlimited Electrical Contractor trade exam

100 scored · 240 min
  • General Electrical Knowledge6
  • Service, Feeders, and Branch Circuits10
  • Grounding and Bonding7
  • Conductors and Cables10
  • Raceways and Boxes8
  • Special Occupancies and Equipment9
  • Electrical Power6
  • Motors6
  • Low Voltage2
  • Lighting3
  • Illuminated Signs2
  • Fire Detection and Alarm Systems5
  • Safety Information6
  • Overcurrent Protection6
  • High Voltage4
  • Photovoltaics10
Connecticut does not publish pass rates. The Electrical Work Examining Board noted in September 2024 that more candidates fail than pass.
Try 10 free questions →

About the Connecticut E-1 Electrical Contractor

Granted by Connecticut Department of Consumer Protection (Electrical Work Examining Board)

Connecticut E-1 Unlimited Electrical Contractor trade exam (PSI): 100 open-book questions in 4 hours, 70% to pass. Questions follow the 2020 NEC; PSI also accepts the 2023 NEC. Contractors also take PSI's 50-question Business and Law exam.

100
Questions
4 h
Time limit
70%
Passing score
PSI
Administered by

Eligibility Requirements

Two years as a licensed unlimited journeyperson (E-2), or six years of equivalent experience and training: 12,000 hours on the job (8,000 as an apprentice plus 4,000 licensed) and 720 classroom hours, proven with notarized employer letters.

Monthly
$39.99
/month, cancel anytime
No commitment
Ideal for exam week crunch
Start Monthly
Recommended
6-Month
$149.99
every 6 months, cancel anytime
$25.00/mo effective
Save 37% vs monthly
Start 6-Month
Lowest /mo
Annual
$229.99
every year, cancel anytime
$19.17/mo effective
Save 52% vs monthly
Start Annual
✓
7-day money-back guarantee. Not satisfied? Email us within 7 days for a full refund — no questions asked.

2020 or 2023 NEC: either is allowed

PSI lets you bring the 2020 or the 2023 NEC to Connecticut’s exam, and Connecticut’s own code is still the 2020 edition. Every question here cites the 2020 section; where the 2023 edition moved a rule, know where it went in the book you bring.

Topic2023 NEC (also allowed)2020 NEC
Dwelling general lighting load (3 VA per ft² in both)220.14(J)220.41220.14(J)
Non-dwelling general lighting unit loads220.12Table 220.42(A)Table 220.12
Lighting load demand factors220.42Table 220.45Table 220.42
Non-dwelling receptacle demand factors220.44Table 220.47Table 220.44
EV charging load in a load calculationArticle 2207,200 VA or the nameplate (220.57)No such rule
Class 1 remote-control and signaling circuitsArticle 725Articles 722 and 724Article 725

What's Included

Every plan gets the same full-access study library.

∞
Unlimited Practice TestsRandomized each session so no two are alike.
⏱
Full-Length Timed ExamsReal exam conditions, real pressure, real prep.
📝
Custom Study SessionsPick your own question count, level, and focus areas.
📖
Codebook ReferencesEvery answer cites the code section, in the edition your exam uses.
📊
Weak Areas AnalyticsAutomatically finds the topics you're missing.
💬
Real Human SupportEmail us any time — we actually respond.

Scheduling & Fees

Where to take it

Administered by
PSI
Reschedule policy
Free to cancel or reschedule if you do it at least two days before the exam; otherwise the $59 fee is lost.
Retake policy
You need 70% on the trade exam and on Business and Law. Once the state approves you, you have one year to start testing, with no limit on attempts; a passed portion stays valid for two years. PSI charges $59 for each attempt at each portion, and you cannot rebook the same day.

Fees

Application fee (DCP, nonrefundable)
$150
E-1 trade exam fee, each attempt (PSI)
$59
Business and Law exam fee, each attempt (PSI)
$59
License fee, initial and each yearly renewal
$150

Keeping Your Certification Active

Renewal requirements

Cycle
Every year ($150)
Continuing education
Four hours of continuing education each year, done by June 30, in person or in live online classes approved by the board. None is required for your first renewal.

Reciprocity

Connecticut may license holders of substantially similar or higher licenses from states that reciprocate, but publishes no list of those states. An out-of-state license counts toward eligibility only if it required the same 720 classroom and 12,000 on-the-job hours.

Sources: PSI Candidate Information Bulletin, Connecticut Electrical Trades (updated 2/4/2026) · Connecticut DCP: electrical license types and scope of work · Connecticut DCP: electrical contractor equivalent experience and training · Conn. Gen. Stat. chapter 393, electricians · Connecticut DCP: electrician continuing education

Frequently asked questions

How is the Connecticut E-1 exam structured?+

Two PSI exams. The E-1 trade exam is 100 scored questions in 4 hours, open book, and you need 70% (70 correct). Services, feeders and branch circuits, conductors and cables, and photovoltaics are the largest areas (10 each), then special occupancies (9). Every contractor also takes the Business and Law exam: 50 questions in 2 hours, 70% to pass, open book on the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th edition.

Does this cover the Business and Law exam?+

Not yet. This product prepares you for the E-1 trade exam on the NEC. You still need to pass Business and Law to get the license, and our Business and Law prep is coming. A passed portion stays valid for two years, so you can pass one exam and then take the other later.

What do I need before I can sit the exam?+

Two years as a licensed unlimited journeyperson (E-2), or six years of equivalent experience and training: 12,000 hours on the job (8,000 as an apprentice plus 4,000 licensed) and 720 classroom hours, proven with notarized employer letters. You apply to the Department of Consumer Protection ($150), and once approved you have one year to start testing, with no limit on attempts.

Which code edition is the exam on?+

PSI allows the 2020 or the 2023 NEC, or either NEC Handbook. Connecticut’s building code still adopts the 2020 NEC: the update to the 2023 NEC was due July 1, 2026, but the legislature’s regulation review committee rejected it in December 2025 and again in April 2026. The 2026 NEC is not on the exam.

Is it open book? What can I bring?+

Yes. You bring your own references: the 2020 or 2023 NEC, OSHA’s construction standards (29 CFR 1926), Ugly’s Electrical References, NFPA 72 (2013), Dunlop’s Photovoltaic Systems, the 2012 National Electrical Safety Code and Convert Your Home to Solar Energy. Highlighting, underlining, margin notes and permanent tabs are allowed; sticky notes are not, and questions and answers written into a book are prohibited. A silent, non-programmable calculator is allowed.

What is the pass rate?+

Connecticut does not publish it. At its September 2024 meeting the Electrical Work Examining Board noted that the data showed more candidates failing than passing.

Can I take the exam online?+

No. PSI gives it at test centers: West Hartford and Milford in Connecticut, four Massachusetts sites, or any other PSI center in the country.

What happens if I fail?+

You see your score on screen, get a report of your weak areas, and can spend 30 minutes reviewing the questions you missed. You cannot rebook the same day, but you can retest as soon as two days later, as many times as you need within your one-year eligibility.

What does it cost?+

A $150 application fee to the Department of Consumer Protection, $59 to PSI for each attempt at the trade exam and $59 for each attempt at Business and Law, and a $150 license fee after you pass.

How often do I renew?+

Every year, for $150. You need 4 hours of continuing education each year, done by June 30, in person or in live online classes approved by the board; none is required for your first renewal.

Ready to pass your exam?

Practice the full exam on the current code, with every calculation worked out.

Start Studying Today →